| DANPALON Domestic Roofing Span Guide |
| |
Polycarbonate Connector |
Standard Aluminum Connector |
HD Aluminum Connector |
| Profile |
Mid Span |
End Span |
Mid Span |
End Span |
Mid Span |
End Span |
| 4mm |
900 |
700 |
1400 |
1000 |
N/A |
N/A |
| 8mm |
900 |
700 |
1400 |
1000 |
1600 |
1200 |
| 10mm |
1100 |
800 |
1600 |
1200 |
1800 |
1400 |
| 16mm (600mm wide) |
1300 |
900 |
1600 |
1200 |
1800 |
1400 |
| 16mm (1040mm wide) |
1300 |
900 |
1600 |
1200 |
1800 |
1400 |
|
End spans occur at both the top and bottom of a roof fall. For roofs with a slope greater than 25°, purling spacings can be increased. Please contact Everlight for more information.
These spans are based on a design wind speed of 41m/s which equates to a 1kPa wind load and with virtually no deflection. Please contact us for information relating to other design conditions, such as vertical and interior applications.
|
FOR ALL COMMERCIAL WALLS AND ROOFING SPAN REQUIREMENTS OUTSIDE THE SCOPE MENTIONED ABOVE USE THE
DANPALON Span Chart |
| |
| LOAD CAPACITY OF DANPALON STEEL FASTENERS |
| Standard Stainless Steel Knee Fastener |
DP8mm |
60kg/each |
| Heavy Duty Stainless Steel Knee Fastener |
DP8mm |
125kg/each |
| Heavy Duty Stainless Steel Knee Fastener |
DP10mm & DP16mm |
175kg/each |
| Trapezoid HD STainless Steel Knee Fastener |
DP10mm & DP16mm |
250kg/each |
|
CLICK FOR FURTHER INFORMATION
SPAN CHART PDF 51kb
HARDY MULLION SPAN TABLE PDF 32kb
|
