 |
 |
 |
 |
| ICE |
CLEAR |
OPAL |
BRONZE |
 |
 |
 |
 |
| GREEN |
BLUE |
REFLECTIVE GREY |
GREY |
| NOTE: Colour samples are indicative only, contact Everlight to receive a DANPALON standard colour chart
|
|
| |
DANPALON®DP8mm
| DANPALON®DP10mm
| DANPALON Multicell®DP8/10/12mm
| DANPALON Multicell®DP16/1040x16mm
|
| Colours |
| ICE |
| CLEAR |
| OPAL |
| BRONZE |
| GREEN |
| BLUE |
| REFLECTIVE GREY |
| GREY |
|
| LT% |
ST% |
SR% |
SHGC% |
| 75 |
70 |
25 |
0.71 |
| 84 |
74 |
25 |
0.74 |
| 45 |
48 |
36 |
0.51 |
| 44 |
44 |
18 |
0.52 |
| 71 |
64 |
21 |
0.67 |
| 63 |
69 |
24 |
0.70 |
| 24 |
21 |
30 |
0.31 |
| 43 |
52 |
16 |
0.58 |
|
| LT% |
ST% |
SR% |
SHGC% |
| 62 |
59 |
30 |
0.61 |
| 80 |
66 |
28 |
0.27 |
| 33 |
37 |
45 |
0.41 |
| 25 |
28 |
11 |
0.40 |
| 58 |
54 |
22 |
0.59 |
| 48 |
57 |
22 |
0.61 |
| 20 |
18 |
30 |
0.28 |
| 33 |
41 |
15 |
0.50 |
|
| LT% |
ST% |
SR% |
SHGC% |
| 60 |
54 |
32 |
0.57 |
| 71 |
60 |
36 |
0.61 |
| 35 |
38 |
40 |
0.42 |
| 25 |
26 |
18 |
0.37 |
| 60 |
52 |
32 |
0.55 |
| 50 |
57 |
27 |
0.60 |
| 20 |
18 |
33 |
0.28 |
| 30 |
35 |
22 |
0.44 |
|
| LT% |
ST% |
SR% |
SHGC% |
| 51 |
50 |
38 |
0.52 |
| 63 |
51 |
40 |
0.53 |
| 22 |
28 |
51 |
0.32 |
| 35 |
35 |
30 |
0.42 |
| 44 |
42 |
33 |
0.47 |
| 49 |
51 |
38 |
0.53 |
| 20 |
17 |
29 |
0.28 |
| 31 |
38 |
20 |
0.44 |
|
LT - % of visible light transmission (400 - 700 nm)
ST - % of total solar radiation transmission (300 - 2800 nm)
SR - % of total solar reflection (300 - 2800 nm)
SHGC - Solar Heat Gain Coefficient, total solar energy transmitted through the panel = %ST + 0.2x[1-(%st+%sr)]
1. Tests were performed in accordance with ASHRAE 74-1988 procedures.
2. Figures are indicative and may change within Danpal's production tolerances.
DANPALON POLYCARBONATE STD STOCK COLOUR AVAILABILITY
Danpalon DP4mm: Clear, Grey and Reflective Grey
Danpalon DP8mm: Clear, Grey, Opal and Reflective Grey
Danpalon DP10mm: Blue, Bronze, Clear, Green, Grey, Ice, Opal, Red and Reflective Grey
Danpalon DP16mm: Ice and Reflective Grey
Standard stock orders normally take 3-4 weeks for delivery following an order.
If you require a special non-stock color, Everlight will have to place a special order with the DANPALON manufacturer, which can have a turn around of approximately 12 weeks delay on delivery
For reverse UV surfaces on flush finish exterior façade and curtain wall projects, allow 12 weeks dealy on order. (Special condition apply)
|
|
ALL COLOURS
|
|
| |
 |
| |
|
